The Window Source of Mankato

627 S Front St. Mankato, MN 56001

Call us today!

507-720-0722

What Does Window Air Leakage Rating Mean? A Simple Guide for Mankato Homeowners

A window air leakage rating shows how much outside air passes through a closed window, and a lower number means fewer drafts.

Most building codes allow 0.3 or less, and 0.1 is the lowest number you’ll see on a label. Actually, the right number for you depends on your window style, which side of the house it faces, and how well someone installs it.

Mankato homeowners feel this more than most. Winter wind off the Minnesota River and the open fields around Blue Earth County pushes on every window. During estimates, the team at The Window Source of Mankato often hears one question: 

Why is the room still cold after we get replacement windows?

So, should you skip this number when you shop? We don’t think so. This guide explains what the rating means, what number to look for in Mankato, and how the install affects it.

Quick Facts

  • The AL rating measures air in cubic feet per minute per square foot of window area.
  • Lower is better: 0.1 is very tight, and 0.3 is the usual code limit.
  • AL is optional on NFRC labels, so a blank spot means you should ask the dealer.
  • Gaps around the window frame can cause drafts, even when the window has a good rating.
  • Casement and awning windows usually have lower air leakage than sliding windows.

What Is a Window Air Leakage Rating?

It’s a lab number that shows how much air gets through a window when it’s fully closed and locked.

Window makers send their products to an approved lab for testing. The lab pushes air at the window and measures how much comes through the frame and sash. Some people call it an air infiltration rating, since air leakage and air infiltration mean the same thing. No window is 100% airtight, so every window gets a number above zero.

What Does “cfm/ft²” Mean?

It means cubic feet of air per minute for each square foot of window.

Labels shorten this to cfm. Think of a box that’s 12 inches on each side: that’s one cubic foot. A 10 square foot window rated 0.3 lets about 3 of those boxes of air through each minute during the test. The same window size at 0.1 lets through only 1.

Where Does the Air Get In?

Air comes in where the window parts meet, not through the glass.

  • Where the sash closes against the frame
  • Worn or thin weatherstrips
  • Locks that don’t pull the sash in tightly
  • Corner joints in the frame

Each spot lets only a little air leak in. But a house with 15 or 20 windows adds up fast, and rooms start to feel drafty.

How to Read the Air Leakage Number on Your Window Label

Find the line marked “Air Leakage (AL)” on the white NFRC label on the glass of a new window.

The National Fenestration Rating Council (NFRC) runs the rating program for windows and doors in the U.S. Its label works like a nutrition label on food. You can hold two labels side by side and compare one specific window to another.

Where to Find “AL” on the NFRC Label

AL sits in the bottom row of the label, under the U-factor and SHGC.

The top row lists U-factor and SHGC. The bottom row lists VT, air leakage, and sometimes condensation resistance. All products at The Window Source of Mankato carry an NFRC label. That way, you can compare real window ratings before you sign anything.

Why Some Window Labels Leave Air Leakage Blank

NFRC treats AL as optional, so some brands leave it off.

Window manufacturers that test with NFRC have to list U-factor, SHGC, and VT, but air leakage remains their choice. A blank spot doesn’t prove the window is leaky. It just means you can’t compare it, so ask the dealer for the test report.

NFRC’s homeowner site explains how air leakage ratings work and why lower numbers mean fewer leaks.

What Is a Good Air Leakage Rating for Windows in Mankato?

A rating of 0.3 or lower meets code, and 0.1 to 0.2 works best for Mankato’s cold, windy winters.

The label number won’t change after the install, so choose it carefully. Here’s how different leakage rates compare:

AL RatingWhat It MeansGood for Mankato?
0.1Very tight, very little air gets throughBest choice
0.2Tight, small airflowGreat choice
0.3Meets most codes and ENERGY STARThe minimum
Above 0.3Below today’s standardSkip it
BlankNot reportedAsk for the test report

Why 0.3 Is the Standard Window Air Leakage Rating

Most U.S. building codes and ENERGY STAR use 0.3 as the top limit for windows.

ENERGY STAR gives its label based on u-factor and shgc. Even so, EPA requires a lab to certify the AL number, and most building codes call for 0.3. That certification means a third party checked the number, not just the brand. You may also see the limit written as 0.30.

Why Tighter Windows Matter More in Minnesota Winters

Mankato’s long heating season and steady winter wind make small leaks cost more.

Heating season here runs from about November through March, and January nights often drop below zero. Wind moving across the river valley pushes colder air through any small gap. That outside air can seep in for months, not just a few weeks. Each leak adds heat loss, and your furnace runs longer to keep up. You see that on your energy bills all winter. If your home still has windows from the 1980s or older, the weatherstrips have likely worn thin.

Why a Low Window Air Leakage Rating Helps in Every Climate

Low air leakage helps in hot, cold, dry, and humid places, while the best U-factor and SHGC change by region.

A Florida home wants glass that blocks sun heat. A Mankato home wants glass that holds indoor heat. Air leakage doesn’t change that way, because stopping outside air helps a home in every climate.

ClimateWhat Low Air Leakage Does
Cold and windy (Mankato winters)Keeps warm air in and cold drafts out
Hot and humid (Mankato in July and August)Keeps cool air in so the AC runs less
Dry and dustyKeeps dust off sills and floors
Spring pollen seasonKeeps more pollen outside

Hot, Humid Summers

A tight window keeps cool, dry air inside when summer turns sticky.

Mankato summers can feel muggy in July and August. Leaky windows let warm, damp air in, so your AC runs longer. An air tight window holds cool air in the rooms where you want it.

Dusty and Pollen-Heavy Areas

A strong seal blocks dust and pollen along with outside air.

Southern Minnesota farm fields kick up dust during planting and harvest. Spring brings tree pollen too. A good seal keeps more of both outside your home.

How Do Labs Test Window Air Leakage?

A lab mounts the window in a sealed test chamber, pushes air at it, and measures the air that gets through. Every lab uses the same test, so you can compare brands fairly. That’s what makes the number useful when you shop.

The Lab Test in Simple Words

The lab pushes air at the window with about the force of a 25 mph wind.

The test follows NFRC 400 or ASTM E283 and uses 75 pascals of air pressure. That’s about the push of a 25 mph wind on a closed window. Gauges then read how much air passes through. That measurement becomes the window air leakage rating on the label.

What the Test Does Not Check

The test checks the window by itself, not how it fits in your wall.

A good lab number won’t help if gaps sit between the frame and the wall. The AL number also differs from a DP rating. DP means design pressure, and it shows how much wind and rain a window can handle. A window can earn a strong DP rating and still let a lot of air through, so ask about both numbers.

Air Leakage vs U-Factor: What’s the Difference?

Air leakage measures air passing through gaps, while U-factor measures heat passing through the glass and frame.

Both numbers shape your home’s energy efficiency, but they track different things.

  • Air Leakage: Shows how much outside air slips through the joints. A smaller number means fewer drafts.
  • U-Factor: Shows how fast heat escapes through the whole window. A smaller number means better insulation.
RatingWhat It MeasuresWhat to Look For
Air Leakage (AL)Air coming through gaps0.3 or lower
U-FactorHeat escaping the windowA low number that meets ENERGY STAR Northern zone rules
SHGCSolar heat gain from sunlightDepends on your climate
VTDaylight coming throughHigher means more light

Argon gas, double-pane or triple-pane glass, and a Low-E coating give you a lower u-factor. They do little for air leakage, because the frame and weatherstrips control that. Look at u-factors and AL together to judge window performance.

Long-Term Benefits of Windows with Low Air Leakage

Windows with low air leakage lower your heating and cooling costs, keep rooms comfortable, and protect frames for many years.

You get these gains every season, as long as the weatherstrips stay in good shape.

Lower Bills and Less Strain on Your HVAC

Reducing air infiltration means your furnace and AC run fewer cycles. That saves energy and puts less wear on your HVAC system. Fresh air exchange still comes from bath fans and kitchen vents, not window leaks. The result is better overall efficiency, plus more energy efficiency and comfort in every room.

The U.S. Department of Energy shares tips on updating or replacing windows to save energy.

Warmer Rooms with Fewer Cold Spots

A chair by the window stays comfortable in January. Rooms on the windy side of the house feel close to the rest of the home.

Less Frost and Moisture Around Frames

Fewer air leaks keep frames warmer, so less frost and water build up on the sill. Less water means less chance of mold and rot around the opening.

A Quieter Home

Air gaps also carry sound. Tighter windows block more traffic noise from roads like Highway 14.

FAQs

Is a lower air leakage rating always better?

Yes. A lower air leakage rating lets less outside air into your home. That means fewer drafts, warmer rooms in winter, and lower heating bills.

What is a good air leakage rating for a patio door?

Sliding patio doors should meet 0.3 or lower, the same limit as windows. Most building codes allow swinging doors to reach 0.5.

Do triple-pane windows have lower air leakage?

Not always. Triple-pane glass lowers U-factor, but frame seals and sash design control air leakage. Read the AL number on the label separately.

Does window air leakage get worse with age?

Yes. Weatherstrips wear out and frames can shift over time. A window that was tested 0.2 years ago may let in more air today.

Is a 0.1 window worth it in Mankato?

A 0.1 window is one of the most energy efficient choices for rooms facing strong winter wind. Still, a careful install matters as much as the number.

Get Draft-Free Windows in Mankato

The right window air leakage rating and a careful install keep cold air outside your Mankato home.Want to know how your current windows hold up? Book a free in-home estimate with The Window Source of Mankato. We’ll check for drafts, show you real NFRC numbers, and give you clear pricing with no pressure. Call 507-720-0722 today.